Includes:
Kicker 10″ CompVT 2 Ohm
The CompVT 10-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power. See below for more details.
| Product: |
| 10″ CompVT 2 Ohm |
| SIZE [in, cm]: |
| 10, 25 |
| IMPEDANCE [Ohms]: |
| 2 SVC |
| Recommended Amplifier Power (watts RMS) |
| 350 |
| Peak Power (watts, per ANSI/CTA-2031-A) |
| 700 |
| SENSITIVITY [dB 1w/1m]: |
| 87.2 |
| MOUNTING DEPTH [in, cm]: |
| 4-1/4, 10.8 |
| MOUNTING DIAMETER [in, cm]: |
| 9-3/16, 23.3 |
| MIN SEALED BOX VOL [cu. ft, L]: |
| 0.8, 22.7 |
| MAX SEALED BOX VOL [cu. ft, L]: |
| 3, 85 |
| MIN VENTED BOX VOL [cu. ft, L]: |
| 1.25, 35.4 |
| MAX VENTED BOX VOL [cu. ft, L]: |
| 1.75, 49.6 |
Kicker KXA400.1 Amplifier
This KX amplifier delivers as much as 400 watts into one channel. See below for more details.
| RMS Power [Watts] |
| @ 14.4V, 4Ω mono, ≤ 1% THD+N : 200 x 1 @ 14.4V, 2Ω mono, ≤ 1% THD+N : 400 x 1 @ 14.4V, 1Ω mono, ≤ 1% THD+N: 400 x 1 +/- 10% |
| Length [in, cm] |
| 8, 20.4 |
| Height [in, cm] |
| 2-⅛, 5.5 |
| Width [in, cm] |
| 8-5⁄16 , 21 |
| Frequency Response ± 1dB |
| 10Hz–160Hz |
| Signal-to-Noise Ratio [dB] |
| 95 |
| Input Sensitivity |
| 250mV-10V |
| Selectable Electronic Crossover |
| Variable Lo-pass 40Hz–160Hz, 24dB/octave |
| Subsonic Filter |
| Variable 10–80Hz, 24dB/octave |
| KickEQ+™ Parametric Bass Boost (Remote Control Adjustable) |
| Boost – Variable 0-18db Center Frequency – 20Hz-80Hz Bandwidth 1-5 |
| Remote Bass |
| Yes |
| CEA Power |
| 200 x 1 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts) |
| CEA Signal-to-Noise Ratio |
| -75dB CEA-2006B (ref: 1W, A-weighted) |
